Agfa Azura C 125, Clean-out unit
Clean-out unit Agfa Azura C 125 (without stacker)
Y/M: 2015, counter: only 37.129 plates
– max. plate width: 1250 mm
– One clean/gum finisher solution that cleans and gums the plate in one operation
– Environmentally friendly finisher solution
– Plate width, min.-max.: 200-1250 mm (7.9-49.0”)
– Plate length: min. 310 mm (11.8”)
– Platesetters: (Agfa) Avalon N8, N16
– Plate speed 60 cm/min (23.6”/min, fixed)
– Plate throughput: 37 plates/h (landscape 745 x 605 mm or 26 plates/h (portrait 1030 x 790 mm)
– Plate volume: Up to 10,000 m²/year
– Brush speed: 150 rpm (fixed)
– Dryer temperature: 55°C (131°F, not adjustable)
– Noise emission – Max.: < 70 dB
– Dimensions (width, length, height): 1820 x 2050 x 1050-1200 mm (71.6 x 81 x 41.3-47.2”)
– Uncrated weight: 210 kg (463 lb)
– Single phase 1W + N + PE 230V / 6 Amps, 50/60Hz or Single phase 2W + PE 208 – 230V / 6 Amps, 50/60Hz
– Power consumption EUR/US: 1350 Watt-hour
Condition: very good, cleaned
Availability: immediately
Agfa’s well-known Azura C95 and C125 are specifically designed for Azura TS plates of up to 95 and 125 cm wide. You either install them on a stand-alone basis, or connect them online with the plate setter (through an L-shaped or straight conveyor). They work perfectly in daylight and at room temperature.
These clean-out units can deal with up to 15,000 m² of plates a year, while only needing 20 l of water for each 300 m2 of plates. As the main ingredient of the gum solution, the water circulates in a closed loop, saving on water costs.
- Tool-free maintenance
- Stand-alone unit or online connection with plate setter
- Chemistry-free solution
- Swift refill and simple cleaning procedure
- Intelligent interface